Industry

Used Haitian Mars: Verify the Hydraulic Hose Replacement Scope

Check a used Haitian Mars hose replacement offer with an assembly register, component evidence, clear exclusions and a documented handover before purchase.

Original procurement worksheet connecting hydraulic hose locations, retain replace or unverified status, component evidence and handover records

Before accepting “hydraulic hoses replaced” on a used Haitian Mars quotation, request a register that identifies the assemblies covered, what remains fitted and what could not be inspected. Match the register to the offered serial number, the replacement work order and the final handover record. A quantity on an invoice cannot establish which hydraulic lines were renewed or whether the quotation covers the complete agreed scope.

For projects in the 500–3,300 metric-tonne used and refurbished machine sourcing range, confirm the individual machine’s nameplate clamping force and original unit. Record its full model, generation and hydraulic modifications. The sourcing range does not establish any Mars model’s rating or availability.

Illustration: an original purchasing worksheet, with no actual machine, inspection findings or approved hose specification shown.

Identify the installation before comparing replacement offers

Haitian’s Brazil page identifies Mars III within its servo-hydraulic solutions and describes the series’ servo drive system. That is useful context for requesting the hydraulic documentation. It does not identify the hoses, fittings or service changes on an offered used machine. Obtain the applicable hydraulic diagram, parts information and available maintenance records for that configuration.

Define what “all hoses” means in the offer. Does it cover the press’s identified hydraulic circuits, included hydraulic options and external equipment? Are cooling-water and lubrication lines outside this particular scope? Have the inspector reconcile the boundaries with the installed equipment. Mark inaccessible or unidentified assemblies as unresolved; do not silently count them as retained and accepted.

Use one register from quotation to handover

Ask the parties to complete this original procurement worksheet before comparing the scope. Give each assembly a reference tied to a diagram location or labelled photograph. The identifiers should follow the work order and final record, so a changed quantity or substituted component can be explained.

Register fieldEvidence to requestPurchasing decision
Location and circuitAssembly reference, connection locations and relevant diagram revision.Is this line inside the quoted boundary?
DispositionRetain, replace or unverified, with the inspector’s finding and date.Which unresolved items prevent scope agreement?
Replacement identityHose and fitting product identities, supplier/assembler record and applicable specification.Who confirms suitability for this installation?
Related workAny proposed changes to supports, protection, adapters or routing.Are these included, excluded or awaiting diagnosis?
CompletionInstalled assembly references, work date and authorised verification record.Does the delivered configuration match the agreed list?
Open itemsMissing documents, deferred access and the party responsible.What evidence is due before payment or collection?

Ask for the basis of selection

Gates’ June 2019 Safe Hydraulics Pocket Guide groups selection information under size, temperature, application, conveyed material, pressure, ends and delivery volume. It also explains why hoses, couplings and assembly equipment must work together. Ask the responsible specialist for the documented selection basis; a matching thread or familiar brand alone does not establish assembly compatibility.

The guide separately addresses routing, movement, heat, abrasion and component cleanliness. Use those topics to ask whether the replacement proposal includes related defects and contamination control. The applicable machine instructions and current product documentation must determine the actual requirements. This historical guide does not specify a replacement assembly for Haitian equipment, and its generic figures should not become a Mars acceptance limit.

Resolve a quantity mismatch before signing

Consider an illustrative offer stating that all hydraulic hoses will be renewed, while the attached work order lists four assemblies without locations. Ask for the register before assuming the scope is complete. The four may be the entire agreed set, selected repairs or only the lines currently accessible. The seller and inspector need to resolve that distinction.

If an assembly is retained, request the inspection basis and maintenance recommendation. If a damaged line prompted replacement, ask what caused the finding and whether related work is included. Record the remedy for incomplete documentation or outstanding work in the purchase agreement. Keep the Mars III warm-load trial separate: an operating demonstration answers a different question from which assemblies were supplied and verified.

Buyer questions

Should every used Mars receive a complete new hose set?

Have a qualified specialist determine the scope from the actual installation, condition, history and applicable instructions. Neither the machine’s age nor this worksheet establishes a universal replacement interval or remaining hose life.

Can photographs close the replacement item?

Photographs help locate assemblies. Close the item against the agreed register, work records and specialist verification. A photograph alone leaves product suitability and unexamined areas unresolved.

Who should inspect or verify the work?

Use qualified personnel following the applicable machine and component procedures, including safe isolation and pressure control. Put the responsible party, verification record and deferred checks in the machine acceptance agreement. This is a purchasing worksheet, not an installation or pressure-testing procedure.

Discuss a used Haitian Mars hose replacement scope with GEEPOW. Share the offer, machine identity, available hydraulic documents and destination so the outstanding evidence can be defined.

Sources

ProductsWhatsAppGet a Quote