Industry

Used Haitian Mars: Check Lubrication Before Buying

Check a used Haitian Mars lubrication system through component identity, delivery evidence and a written repair and retest scope before accepting an offer.

Archive Haitian MA8000 III photographed in a workshop with the mould area visible

Before accepting a used Haitian Mars lubrication system, identify the equipment fitted to that particular press, obtain the applicable lubrication instructions and ask a qualified technician to document whether the required points receive lubricant under the prescribed checks. Put any repairs and the evidence required after repair into the quotation. A reservoir photograph or a pump that appears to run leaves the delivery question open.

For a project within the 500–3,300 metric-tonne used injection moulding machine procurement range, confirm the offered machine’s nameplate clamping force and original unit. Record the full model, generation, serial number and any lubrication modifications. The procurement range does not establish the specification or availability of an individual Mars.

Archive photograph: Haitian MA8000 III in a workshop. This image provides machine context; it does not establish lubrication condition or current availability.

Start with the fitted system and its instructions

Haitian’s Mars IIS upgrade description identifies an improved central oil-lubrication arrangement for that series. That gives a buyer a specific feature to investigate on an IIS offer. It does not identify the equipment on another generation, establish the lubricant required by a particular serial number or prove that the offered unit still has its original arrangement. Ask for the relevant manual, lubrication diagram, component identification and records of replacements or conversions.

Have the inspector reconcile those documents with the press. If a pump, distributor or controller has changed, request the replacement identity and the basis for its compatibility. Keep unresolved differences visible in the offer instead of treating a familiar enclosure or series name as a complete specification.

Ask what the evidence actually covers

SKF’s 2025 progressive lubrication catalogue, page 6, describes a pump feeding metering devices, with branch lines connecting them to lubrication points. For the progressive arrangement described, a blocked point stops the circuit served by that pump outlet. This is an example of why delivery and monitoring need interpretation against the actual circuit. It is not evidence that a Haitian Mars uses SKF components or a progressive system. The offered press needs its own diagram and inspection method.

Ask the technician to state which points and functions were checked, the applicable procedure, the conditions used and any areas left unverified. A record saying “lubrication checked” is difficult to assess without that scope. The purchaser needs a finding that can be tied to the machine and to the work still required.

Use one evidence, repair and retest table

Attach this original worksheet to the inspection request. The responsible technician should define the applicable checks and acceptance criteria from the machine and component instructions.

Buyer questionEvidence to retainRepair and retest agreement
Which system is fitted?Machine identity, applicable document edition, component identities and recorded modifications.Resolve mismatches before accepting a parts list or test plan.
What lubricant and settings apply?The documented requirement for this installation and the identified product currently used.Have the technician assess discrepancies and specify any corrective work and subsequent verification.
Which delivery paths were checked?A record linking inspected points and relevant lines or metering equipment to the diagram, with findings and deferred items.Name the affected parts, required work and the delivery evidence to be obtained afterwards.
What does the monitoring establish?Installed monitoring identity, its documented coverage and the result of the prescribed functional checks.Resolve faults and repeat the applicable checks; retain the explanation of what remains outside the monitoring coverage.
What closes the purchasing condition?Dated inspection and work records for the offered serial number, followed by the agreed retest results.State the responsible party, completion stage and remedy if the agreed evidence is incomplete.

Compare two offers with different evidence

Consider an illustrative comparison, with no actual stock or prices implied. One seller says the lubrication pump was replaced and supplies a photograph. Another provides the installed component identity, an inspection scope covering the documented delivery paths and a written commitment to resolve the listed findings before retesting.

The first offer may still be suitable, but the buyer has questions to close: why was the pump replaced, what equipment was fitted, and what was verified beyond the pump itself? Ask for those answers and an itemised scope before comparing the complete offers. Where a technician finds a problem, obtain the diagnosis, proposed repair and relevant retest rather than assuming that replacing the pump resolves it.

Include the accepted worksheet in the machine acceptance-test agreement. Qualified personnel must determine safe access and the prescribed inspection conditions. Do not bypass guards or alarms to obtain a demonstration.

Buyer questions

Does clean hydraulic oil prove the lubrication system is working?

Identify the circuits separately. A report on sampled hydraulic fluid does not document delivery at the clamp’s lubrication points. Use the hydraulic oil analysis guide for that separate evidence question.

Can I use one lubricant or interval for every Mars?

Obtain the requirement for the actual machine and fitted components. Have the technician resolve missing instructions or a changed installation before agreeing products, quantities or settings.

Does a satisfactory check prove the clamp has no existing wear?

The result supports the functions and points examined under the recorded conditions. Existing mechanical condition and production performance require their own assessment. Keep unresolved wear findings and deferred checks in the purchase agreement.

Discuss the inspection scope with GEEPOW

Send GEEPOW your Haitian Mars offer and lubrication questions, including the serial number, available documents, intended mould and destination. Ask for the machine’s evidence, outstanding work and acceptance responsibilities to be defined before selecting an offer.

Sources

ProductsWhatsAppGet a Quote