Used PVC Injection Moulding Machines

Buy a used PVC injection moulding machine around the compound and product you need to run. A low purchase price has limited value if the injection unit, mould or cooling controls need substantial correction. Send GEEPOW your material specification and mould details to define a machine shortlist, the evidence required before purchase, and the costs still needing a written quotation. Every candidate needs its own configuration and condition checks.

Which PVC compound will you actually mould?

Identify rigid PVC (UPVC) or flexible PVC, the supplier and exact compound grade. Include hardness where relevant, colour, additives, permitted regrind and the end-use requirements. Teknor Apex publishes separate guidance for flexible compounds; GEON provides guidance for rigid formulations. Do not transfer equipment assumptions between them. Have your compound supplier review the proposed material-contact components and processing capability.

  • Provide the current technical data sheet and safety data sheet.
  • Send the part drawing, required quality checks and representative material.

What proves that the injection equipment is compatible?

Ask for the original machine build specification, injection-unit identity and records of later replacements. YIZUMI’s UPVC catalogue describes a dedicated screw/barrel package, corrosion-resistant material-contact features, back-pressure control and barrel cooling. These examples explain what to investigate; they do not establish the configuration of a used machine. Require OEM-approved compatibility for the actual screw, barrel, tip, nozzle and other material-contact parts, supported by supplier confirmation for your compound. A seller’s “PVC machine” label is insufficient.

Will your shot and mould fit the complete machine?

Supply total shot weight including runners, cavity count and expected cycle requirements. Ask the OEM or a qualified process specialist to assess injection capacity and material residence for the agreed compound, rather than selecting from a catalogue shot-weight number alone. Check mould dimensions and weight, tie-bar clearance, platen mounting, opening and ejection travel. For fittings, confirm core-pull movements, connections and clearance for cylinders, guards and part removal.

Which condition and factory checks matter before buying?

Request inspection records for screw/barrel wear, corrosion, deposits and any replacement work, with photographs or measurements tied to the machine identity. Check temperature sensors, heaters, cooling fans where fitted, control response, alarms and available maintenance history. PVC is sensitive to heat and shear; degradation can produce corrosive hydrogen chloride. Have qualified specialists review ventilation, material history, cleaning and safe interruption procedures against the compound supplier’s guidance, OEM instructions and your factory requirements.

How should a PVC acceptance trial be agreed?

Specify the exact compound, mould or representative trial tool, sampling plan and acceptance criteria before paying for the trial. Record the machine identity, installed injection components, material batch, agreed settings and observed results. Review appearance, dimensions, part weight and other product-specific checks over the agreed run. A demonstration using another polymer establishes little about your PVC job. Ask the OEM and compound supplier to define suitable operating limits and interruption handling; this category page supplies no universal settings or operating recipe.

What makes the used purchase good value?

Compare the machine price together with documented repairs, compatible replacement components, trial costs, auxiliaries, packing, transport, import costs and installation. Identify exclusions and who supplies technical support at destination. Put any required correction and its reinspection into the quotation. Availability, price and delivery timing need current confirmation for each candidate; this page is a buying framework, not a stock list.

Replace a broad claim with a purchase check

Seller statementEvidence to request
“Suitable for PVC”Exact compound plus documented compatibility of the installed injection equipment.
“Refurbished”Itemised work, replacement-part identities and inspection results after repair.
“Tested running”Agreed PVC material trial with traceable samples and acceptance records.
“Low-cost machine”Comparable delivered scope, necessary corrections and written exclusions.

Send these six inputs for a useful machine enquiry

  • Rigid or flexible PVC, exact supplier grade, technical and safety data sheets.
  • Part drawing, total shot weight, cavity count and quality requirements.
  • Mould dimensions, weight, opening needs and core-pull details.
  • Required output and the proposed material-trial acceptance criteria.
  • Destination, power supply, cooling and ventilation arrangements.
  • Budget scope, delivery requirement and acceptable repair or replacement work.

Technical references

Reviewed 18 November 2026. Manufacturer and material-supplier references explain what to check; they do not certify the condition or configuration of any offered used machine.

Share with your buying team

Send this page to a colleague to review the machine requirements.

ProductsWhatsAppGet a Quote